Discussions

Your Questions About Wind Turbines Oklahoma

Paul asks…

do you think wind energy is viable if the government decides to stop extending subsidies?

. Energy from wind power is becoming an increasingly significant source of energy, considering that the price of oil is getting dearer. This is especially so for oil-deficient developing nations like India which meet their energy needs by importing oil. Providing facts and figures, analyze the opportunities and challenges that wind energy companies face in setting up wind farms in India.

admin answers:

Hi there, I work for one of the world’s leading renewable energy consultancies. While my background is more technical in nature (I’m an engineer), I’ll take a shot at answering your question.

Wind energy certainly is viable in many parts of the world without subsidy. We came dangerously close to finding out exactly how viable it would be this year in the U.S., when an extension of the Production Tax Credit (PTC) was extended into 2009 at the last minute as one of the “sweeteners” that got the $700 billion Wall St bailout passed.
Http://www.nicholas.duke.edu/nicholas/insider/thegreengrok/the-700-billion-bailout-bill-goes-green-not-quite

The current subsidy for wind energy in the U.S. Is PTC, which is a tax credit currently equal to 2 cents per kWh. The price for electricity varies significantly by region, so some regions are more closely tied to the PTC than others to make the economics of a wind project work out. For example, the price for electricity is only about 4.5 cents per kWh in the Midwest (e.g. Oklahoma, Kansas, North Dakota), so that extra 2 cent per kWh makes a huge difference. In other parts of the country (California, Hawaii, New England), the price of electricity is over 10 cents per kWh, so the 2 cent tax credit is relatively less valuable there.

The bottom line is that there are several places under development now in the U.S. That are good enough to justify being built without the 2 cents per kWh tax credit – these select locations are very windy, close to a transmission line, and/or in areas with high electricity prices. Without the subsidy, the growth of wind energy in the United States (same goes for the rest of the world, to my knowledge) would be severely affected. Thousands of people would be laid off, a significant portion of projects would be canceled, and we’d all go back to burning lots of cheap and dirty coal, nuclear, hydro, and finally natural gas to fill off the balance of our energy needs.

Regarding your question about oil imports in countries like India, I think you might be slightly misguided. Wind energy does not provide fuel for transportation, just electricity. Until we have a way to develop the hydrogen economy (http://auto.howstuffworks.com/hydrogen-economy.htm, convert electricity to hydrogen fuel, distribute it through a nationwide infrastructure we don’t have, and put it in cars that are currently cost-prohibitive), we will remain addicted to oil. The alternative to oil (for now) is ethanol. Especially in places like Brazil, which have plenty of land and a great climate for growing sugar cane ethanol rather than the subsidized corn ethanol we produce here in the U.S.

Wind energy is the cheapest form of renewable energy currently available, and it will get cheaper in the coming years as the credit crisis corrects what has been a massive seller’s market for wind turbines in the last few years. Competition in wind turbine manufacturing is up, and the cost of steel (the 80 m towers) and cement (the massive foundations) is down. These factors will lead to wind energy becoming cheaper in the next few years. Wind energy can be cost-competitive with natural gas, offsetting our need for this finite resource and (hopefully) lowering prices for consumers. That’s the long-term benefit of the subsidy – get the industry built up now so we will be well set for a future of increasingly scarce oil and natural gas, which will be imported from unstable regions of the world.

Ken asks…

how many wind turbines would it take to power the united states?

not quite sure how to figure it out myself, i’ve never really been good at math! anyone who can explain how to do it and what i need to find out, or just tell me the answer, please help!

admin answers:

Hey Sunshine, here’s a better way to word your question: How much real estate would it take to install the wind turbines necessary to power the United States? There is no real answer to how many turbines because they vary in size and output depending on the wind variations where they are installed. A turbine in Oklahoma might have different blade configurations than one in North Dakota because in one state, the winds blow really hard in the fall and winter, in the other, they blow fairly steady all year. But here is something you can bite into: “There is enough wind in North and South Dakota to power the entire country.” That was made about 15 years ago after the American Wind Energy Association did some research on the subject. It would be stupid to install all the wind turbines there, because we would waste lots of it running it through millions of miles of transmission lines, but you get the idea.

The real beauty of wind power is that it is spread fairly evenly over the middle third of our globe, which is where most of the people live. So we can put turbines near population centers and reduce how much we ship around, taking the load off our grid, and reducing air pollution from coal fired plants and other traditional sources. There are some great places to look into this subject, I will list some below. Take care, Rudydoo

Powered by Yahoo! Answers

Your Questions About Wind Turbine Jobs

Nancy asks…

What employment opportunities can we get from wind energy industries?

What are some jobs or careers offered by wind turbine manufacturing companies and industries of wind turbines technology?

admin answers:

Aerodynamic engineering and a turbo charger.

William asks…

I would like to relocate myself and my family to Europe, where do I start?

My husband would like to find a job that will relocate us. My dad also would like to find a job. They both do electrical work. We first thought about wind turbine companies. We don’t know which ones will relocate.

admin answers:

Bechtel National is a good company to look into. Their employees are often known as “Bechtel Families” because they encourage the families to re-locate for different jobs, thus resembling a situation similar to the military. It’s also a good choice, because they have everything from office work to heavy manual labor, so there’s a wide range of jobs.

As for choosing a country, I’d honestly start at Wikipedia, researching religions, monetary exchange, school systems (if applicable to you), weather, average cost of living and so on. It would certainly be horrible to wind up in a nation where you aren’t catching onto the language (if different from what you speak) or the cost of living was so drastically different that you didn’t realize your job wasn’t going to be as good as you thought! Keeping that in mind, it might be wise to go on a vacation to a handful of countries to see if they’re as good a fit in person as they appeared to be in a traveler’s guide.

Good luck

Powered by Yahoo! Answers

Your Questions About Wind Generators Ebay

Donna asks…

how can you make a wind powered generator with solar panels as back up?

I am in the process of building a wind powered generator and I want to put on some solar panels on it as a back up source of energy. So pleas HELP!!!!!!

admin answers:

Hi, This is a good question and I have your answer, This is a very simple thing to do you can buy all your materials in any store as simple as using a 6″ PVC Tube to make the blades for your wind generator. E-bay has a lot of DC Generators that are good to use as a wind generator. I bought a guide named earth4energy and they show how to make a wind generator in 3 simple steps. You can find this guide at : www.greenproductsolutionpr.com and also a lot of information about renewable energy.

Steps to make a wind generator :

Definitions:

Generator:
This wind turbine transforms wind power into electricity, with the use of an A DC Motor that generates the power to spin the blades,
Options include:
 Electric lawn mower motors that have been recycled.
 All motors made by Ametek.
 Alternators with a permanent magnet (car alternators).

In order to find a DC motor you can check eBay, or look for inexpensive power tools. Drills, screwdrivers and other tools are a great way to find inexpensive DC motors although they do not generate much energy they are great for smaller projects. A great DC motor/generator is the Ametek 30VDC as pictured below. I purchased this DC motor for about $50 from ebay.

Http://www.earth4energy.com/recommends/ebay-ametekwindgenerators.php

Blades:

building PVC blades from an old pipe please watch our instruction video from the members page.
 Acquire a 6-inch wide, 24-inch long PVC pipe.
 Quarter the piece of pipe around its circumference, cutting it lengthwise into four pieces (diagram on the next page).

This is only a preview of the step-step guide that they include in their package for more information please visit : www.greenproductsolutionpr.com

I can share with you more information because is a copyright information

Robert asks…

Will a 90v DC motor produce a good amount of power as a wind generator?

I just bought it on eBay a bit ago. It is the size of a blower motor and has a built in magnet. Will I get a sufficient amount of wattage and amps?

admin answers:

It would depend on the rpms. Also, how many amps is the motor?

Powered by Yahoo! Answers

Your Questions About Wind Turbine Generators Types

Sharon asks…

What is the dollar cost of a megawatt wind turbine?

The megawatt size wind turbine seems to be a standard so why not have the cost of these machines available to compare with other type of electric generators?

admin answers:

In terms of the initial cost, just to purchase a commercial scale turbine, the usual price is roughly $1 million per megawatt of capacity. So, a GE 1.5 MW would cost around $1.5 million. Installation and development of the site would be additional costs.

Robert asks…

What type of bearings to use in a savonius wind turbine?

Hi all

I am currently building a savonius wind turbine that will be around half a meter tall. I have the general plan drawn up but just need some answers on what type of bearing to use – I really have no idea about different bearings/lubricants/size restraints etc. Would really appreciate any help that could be provided.

Thanks!

admin answers:

Basically you need a thrust bearing somewhere in the process to take the weight and another one or two bearings to take the wind force and keep it upright. If you are mounting above a generator, there might be a thrust bearing in the generator.
In your design, you have to provide for mounting the bearings. Lets suppose you were putting the unit on a shaft with a pulley on the bottom to drive a pump or generator off to the side via a belt. You would go to www.grainger com or local bearing firm and tell them you wanted a flat mount ball bearing for your shaft diameter – this would be the top support – and you wanted a flat mount thrust bearing for the bottom, as well as a shaft collar all to match the shaft. For your project these might total $15-20.
The simplest possible mount would be a stiff frame rectangle to which you mount the ball bearing in the middle of the top and the thrust bearing at the bottom. What the shaft collar does is screw to the shaft and rest against the bearing, transferring the weight. Since I have proposed a pulley, the shaft would have to be long enough to go through the frame to put the pulley below, so you didn’t have to take the unit apart to change the belt.
To be honest, most ball bearings even if not thrust, will take much more weight than your turbine and you could probably get the shaft collar and two bearings at your hardware store or home center where they are sold as replacements for wheel barrow and cart wheels
for another view
http://www.macarthurmusic.com/johnkwilson/MakingasimpleSavoniuswindturbine.htm

Powered by Yahoo! Answers