admin answers:

It is not mechanically feasible to make a DFIG with a sufficient number of poles to match the synchronous speed to the optimum speed of a wind turbine. The space required for numerous stator windings would make the machine too large and heavy for mounting in the nacelle of the turbine. Since the speed increasing gear can not be eliminated entirely, the DFIG speed and the gear ratio are selected to optimize the cost, size and weight of the combination.

A PMSG using rare-earth magnets can be designed for a speed that allows the gear to be eliminated. The resulting machine has a larger diameter than a DFIG of the same power rating, but the cost and weight of the PMSG without a gear make it competitive with the DFIG package. The complete package comparison includes the cost and complexity comparisons of the electronic power conversion units and the expected reliability comparison of the two packages.

This is the basic outline of the design considerations. The complete analysis must be rather complex and contain assessments that are not viewed in the same way by everyone who undertakes such designs.

admin answers:

The only cost effective installation I’ve seen is at a home where connection to commercial AC power was very expensive. The home owner was quoted about $15000 to run a line to the house, and this became the alternate energy budget. Several solar panels, both for electricity and water heating were installed on the roof. A wind generator was installed on a 80 foot pole to supplement the solar panels. Battery banks, inverters, etc were installed inside to power the house. All appliances were selected to be very energy efficient, lighting was minimized, but remained adequate. The total price was less than quoted for commercial power, and comes with the added benefit of no further electric bills other than routine maintenance and repair of the system.

I think that if there is commercial electricity available you will be hard pressed to justify the expense financially. I’m installing a wind system to supplement the electric use in the house. Payback looks like it could take 10-12 years, but I’m not doing it as a money saving project, but rather as something to experiment with and learn. Instead of wasting money on cigarettes and beer every week, I’ve stashed money aside to finance my project.

I have pictures, electric diagrams, structural drawings, etc on my web page.
Http://members.rennlist.org/warren/wind.html

admin answers:

Here is an article that might answer your question from Ben Ford… He has been around for a while and is an experienced inventor and author on green energy .He showed me how cheap it is to build wind and solar… That will be me out there repairing my fence this summer and building solar and wind power!
Author Ben Ford
How would you react if your neighbor told you she was going to build wind turbines? Pretty impressed? The truth is that it is not difficult to build wind turbines and many homeowners are taking the challenge to build their own wind turbines as a cost-effective means to utilizing renewable energies. It isn’t exactly snap-your-fingers easy to build wind turbines either, but with the proper plans and a motivated builder you can be building wind turbines in no time.

It is definitely your best bet, before setting out to build wind turbines, to purchase an instruction manual or guide to follow. Remember that you get what you pay for when it comes to instructions. Make sure you find a manual that is easy to read with detailed instructions. There are also many online resources and forums to help guide you through your wind turbine building process.

To familiarize yourself with the basics, before you get started on your project to build wind turbines, there are four basic components to wind turbines. To build wind turbines you must be familiar with the towers, the batteries, the turbines and the tail and propeller assembly. The tools generally required to build wind turbines are simple as well, you will need wrenches, a saw and a drill. There may also be a need for additional tools depending on how of the wind turbine you will be building yourself.

One part that you will probably be ordering when you decide to build wind turbines is the motor. The motors on wind turbines do require regular maintenance and oiling for continued efficiency, but this is a small price to pay for the excellent energy these systems provide. In addition to the motor, you are definitely going to need a good-sized workspace. Depending on your target energy output, your propellers or blades could get up to 8 feet in diameter (4 ft blades).

It takes a little work to build wind turbines, but there is really nothing overly complicated about the process and generally the process can be fairly inexpensive once you are operational and your electric bills are dropping each month. Building wind turbines is also a fast growing occupation worldwide as technicians are tough to find. So learn how to build wind turbines for yourself and take advantage of the opportunities free electricity and know how can provide.

admin answers:

Hi Lara. We have been powering our home for 11 years now with the wind and sun. There are also solar water preheaters, rainwater collection tanks and a wood stove in the living room and shop. For the past 6 years or so, I’ve been going to the local schools and teaching seminars on solar power, and in some cases, the schools have run bus loads of kids out to our place to see a home like this first hand. One thing I’ve learned over the years is almost everyone asks questions about wind turbines first. There is something about them, the way they move, the noise people imagine when they see even a picture of one that draws their attention.

Wind power is actually a bit of work. The machines are mounted in very inaccessible places, they have moving parts that break down, they can make unwanted noise, and anyone within a quarter mile has to see the thing, yet everyone wants to learn more. Pictures of solar panels are cool, but they never move or even change color when they run. Pictures of a biomass operation sound absolutely ugly. Probably the wood stove would be the best of them. If it were me, and you wanted to draw attention with your poster, go with wind. Look online for interesting pictures of turbines, particularly in unusual places, like a remote artic weather station, next to a camping tent, on a sailboat or a mountain. A really good eye catcher is a big one with a technician hanging on the side of the tower in a harness working on the turbine. That really gives you a great idea how large the units can be. I’ll list some places you can look for photos, and information you can add to the poster. Good luck Lara, and take care, Rudydoo