admin answers:

I do not think there is that many types of wind turbines because wind turbine’s solo purpose is to make eletricity and they don not really bulid them in the suburbs because it may be noise and it take a lot of space and also ot needs a lot of wind so only a limited area will be able to set up wind turbines.

admin answers:

The turbine has to be 30 feet above surrounding buildings and trees. It has to be two tower heights away from any building. If it falls in any direction, it must not cross a property line. You pretty much need to have an acreage to have a wind turbine.

admin answers:

Eath4Energy is a scam. Please see my review at http://www.nlcpr.com/Deceptions6.php

If your motivation is to reduce your energy bills, then you should first look at conservation projects. These are things like using low flow shower heads, replacing old appliances and adding more insulation.

If your motivation is to generate some energy for learning purposes or as a matter of principle, then consider the following:

Building a wind generator yourself is not a simple project. If you can build an utility trailer for your truck (welding, metal fabrication) then you could certainly tackle the job. There is a great book available from www.otherpower.com called Homebrew Wind Power plus you can order any parts and assemblies that are beyond your abilities to fabricate. Cost of turbine is about $2000 and you need a tower as well. There are cheap units at some hardware stores but they are garbage compared to to the unit designed by www.otherpower.com

A more realistic project would be to get a commercial solar panel (making your own from broken cells on eBay is not worth it), inverter, charge controller and battery and using it to power some things in your house. For about $1000 you could have something to power a small computer. A complete system to power your home is more in the $30,000 range.

There are, unfortunately, no cheap ways to make your own power as Earth4Energy is promoting other than perhaps getting lucky in an eBay auction or purchasing a solar system from a bankruptcy sale.

Do your conservation measures first. Then read Homebrew Wind Power, read the solar links at http://www.nlcpr.com/Links1.php and then decide what type of project you are up for. By then, you will know exactly what you want to do.

admin answers:

Look at the Prairie Turbines site again. The price of the micro-controller including the hall device is $255. The $45 book provides a complete list of material and instructions to build everything else.

The micro-controller monitors the speed sensor and provides control signals to two solid-state relays. One relay connects the motor to the grid when the speed reaches the motor’s 1800 RPM synchronous speed and disconnects the motor if the speed drops below 1800 RPM. The other relay is energized to release the brake when the controller is energized and de-energized by the controller when the motor speed exceeds the maximum safe operating speed. If this occurs, the controller apparently must be manually reset.

I did not find the maximum safe operating speed stated on the web site. If the full load speed of the motor is 1750 RPM, the full load slip is 1800 minus 1750 or 50 RPM. The speed at which the motor would generate full load current and present full load torque to the turbine is 1800 RPM plus the full load slip or 1850 RPM. With the design described, a three-phase motor is connected to a single phase source with capacitors connected between the source and the third motor phase. That is likely to increase the motor slip somewhat.

I am not sure what happens if the motor is driven above the speed at which it generates full load current. A three-phase motor operating as an induction generator connected to a three-phase supply has a torque vs. Speed curve that is something like the mirror image of the motoring torque vs. Speed curve. The curve is likely different with the single-phase connection used in this case. I don’t know what the speed vs. Current curve looks like in either case, but I will see if I can find it. I am also curious to know if the Alan Plunkett listed on the web site as an author is the Alan Plunkett that is well known author of technical papers on inverter and variable frequency drive subjects.

Added information:
I found information indicating that, for a 3-phase motor connected to a 3-phase supply, the speed vs. Current curve for induction generator operation is like a mirror image of the speed vs. Current curve for motor operation. That would mean that the maximum speed would need to be limited to the synchronous speed plus the full-load slip. The web site indicates that the full-load speed for the motor that they used is 1725 RPM for 3-phase operation. That would make the maximum speed 1875 RPM plus the additional slip due to the single phase with capacitor arrangement.